Alvarion SW VERSION 5.1 system manual Transmit Power Compliance With Regulations

Configuring Basic Parameters

3.1.3Transmit Power Compliance With Regulations

CAUTION

In regions where local radio regulations limit the maximum transmit power of the unit the installer is responsible to properly set the Antenna Gain parameter (if configurable) according to the actual antenna being used. This will limit the upper limits of the Tx Power parameter in the AU and the Maximum Tx Power in the SU (where applicable) to the value of “Permitted EIRP-Antenna Gain”.

The Tx Power parameter in the AU and the Maximum Tx Power in the SU (where applicable) should not exceed the Permitted EIRP-Antenna Gain, according to the following table:

Table 3-2: Regulation Maximum EIRP

Country Code			Maximum EIRP (dBm)
		20 MHz Bandwidth			10 MHz Bandwidth		5 MHz Bandwidth
Japan 4.9 GHz	34				34 (NOTE 1)	NA
FCC 5.3 GHz	30 (NOTE 3)				27 (NOTE 2)		NA
FCC 5.4 GHz	30			27			NA
ETSI 5.4 GHz	30			27			NA
ETSI-F 5.4 GHz	30			27		NA
Australia 5.4 GHz	30			27		NA
Universal 5.4 GHz	AU: 38				AU: 38		NA
		SU: 49			SU: 49
FCC 5.8 GHz	AU: 36				AU: 36		NA
		SU: No Limit (PtMP)			SU: No Limit (PtMP)
UK 5.8 GHz	36			33			NA
Australia 5.8 GHz	36			36		NA
India 5.8 GHz	36			33			NA
Germany 5.8 GHz	36			33			NA
Universal 5.8 GHz	AU: 36				AU: 36		NA
		SU: No Limit (PtMP)			SU: No Limit (PtMP)
FCC 900 MHz	NA				NA	36

NOTE 1 (Japan 4.9 GHz, 10 MHz Bandwidth):

In BreezeACCESS units operating in the 4.9 GHz Japan band (not B&B point-to- point) with a 10 MHz bandwidth, the following rules must be met for full compliance with regulations:

Commissioning

73