
Menus and Parameters
4.2.6.4.1.5.1VLAN Relaying Support
The VLAN Relaying Support option enables or disables the VLAN Relaying feature.
Available selections are Disable and Enable.
The default selection is Disable.
4.2.6.4.1.5.2Add Relaying VLAN ID
The Add Relaying VLAN ID option enables adding a VLAN ID to the VLAN Relaying List. One VLAN ID can be entered at a time. The maximum number of VLAN IDs in the VLAN Relaying List is 20.
Valid values are 1 to 4094.
4.2.6.4.1.5.3Remove Relaying VLAN ID
The Remove Relaying VLAN ID option enables removing a VLAN ID from the VLAN ID Relaying List. Valid values are VID values (from 1 to 4094)) that are included in the VLAN Relaying List.
4.2.6.4.1.5.4Show VLAN ID Relaying List
The Show VLAN Relaying option displays the values of the VLAN IDs included in the VLAN Relaying List.
NOTE
If the VLAN ID Relaying List is empty and the VLAN Relaying Support is Enabled, then all data frames relayed from the wireless link are discarded.
If VLAN Relaying Support and VLAN Forwarding Support are both enabled, then all VLAN IDs configured in the Relaying List must also be configured in the Forwarding List.
4.2.6.4.1.6 Service Provider VLAN ID (SU only)
The Service Provider VLAN ID is applicable only when the VLAN Link Type parameter is set to Service Provider Link. It enables defining the Service Provider VLAN ID for data frames, which identifies the Service Provider VLAN to which the unit belongs.
The range is 1 to 4094.
The default value is 1.
The Service provider VLAN ID affects frames received from the wireless link port, as follows:
Both
Operation and Administration
175