Chapter 4 - Operation and Administration
Per Modulation Level counters were reset. The average is calculated using the SUCCESS count at each modulation level as weights.
For AUs, the SUCCESS and FAILED counts are provided for each of the associated SUs, which are identified by their MAC address.
4.2.5.7Link Capability
The Link Capability option provides information on HW and SW capabilities of relevant units. In an AU, the information provided in the Link Capability reports is for all associated SUs. In an SU, the Link Capability reports include information on all AUs in the neighboring AUs table (all AUs with whom the SU can communicate).
The Link Capability feature enables to adapt the configuration of the unit according to the capabilities of other relevant unit(s) to ensure optimal operation.
The Link Capability submenu includes the following options:
4.2.5.7.1Show Link Capability-General
Select this option to view information on general parameters of relevant units. For each relevant unit, identified by its MAC address, the following details are displayed:
HwVer: the hardware version of the unit.
CpldVer: The version of the Complex Programmable Logic Device (CPLD) used in the unit. This parameter is available only in AUs, displaying the CPLD version in the relevant SU.
Country: The 3 or 4 digits country code supported by the unit.
SwVer: The SW version used by the unit. This parameter is available only in SUs, displaying the SW version in the relevant AU.
BootVer: The Boot Version of the unit. This parameter is available only in AUs, displaying the Boot version in the relevant SU.
4.2.5.7.2Show Link Capability-Wireless Link Configuration
Select this option to view information on current wireless link parameters of relevant units. For each relevant unit, identified by its MAC address, the following details are displayed:
ATPC Option: Enable or Disable.
Adaptive Modulation Option: Enable or Disable.
BreezeACCESS VL System Manual
126
