About This Manual
This manual describes the BreezeACCESS VL Broadband Wireless Access System
Release 5.1 and how to install, operate and manage the system components.
This manual is intended for technicians responsible for installing, setting up and
operating the BreezeACCESS VL system, and for system administrators
responsible for managing the system.
This manual contains the following chapters and appendices:
Chapter 1 – System description: Describes the BreezeAccess VL system and
its components.
Chapter 2 – Installation: Describes how to install the system components.
Chapter 3 – Commissioning: Describes how to configure basic parameters,
align the Subscriber Unit antenna and validate unit operation.
Chapter 4 – Operation and Administration: Describes how to use the
BreezeACCESS VL Monitor application for configuring parameters, checking
system status and monitoring performance.
Appendix A – Software Version Loading Using TFTP: Describes how to load a
new software version using TFTP.
Appendix B – File Download and Upload Using TFTP: Describes how to
download and upload configuration files using TFTP. This procedure is also
applicable for uploading country code and feature license files.
Appendix C – Using the Set Factory Defaults Utility: Describes how to use the
Set Factory Defaults utility to enable management access to units where
wrong or unknown configuration disables regular access to the unit for
management purposes.
Appendix D – Preparing the indoor to outdoor SU cable: Provides details on
preparation of the indoor to outdoor Ethernet cable.
Appendix E – Parameters Summary: Provides an at a glance summary of the
configuration parameters, value ranges and default values.