Chapter 4 - Operation and Administration
4.2.6.2.14.6 Spectrum Analysis Information Display
The Spectrum Analysis Information Display option enables viewing the results of the last analysis process. The displayed information includes the following details for each channel:
Frequency in MHz
Signal Count: The number of signals (excluding OFDM frames with the correct bandwidth) in the channel.
Signal SNR: The average SNR of signals (excluding OFDM frames with the correct bandwidth) in the channel.
Signal Max SNR: The maximum SNR of signals (excluding OFDM frames with the correct bandwidth) in the channel.
Signal Width: The average width in microseconds of signals (excluding OFDM frames with the correct bandwidth) in the channel.
OFDM Frames: The number of OFDM frames with the correct bandwidth detected in the channel.
OFDM SNR: The average SNR (in dB) of OFDM frames received in the channel.
OFDM Max SNR: The maximum SNR (in dB) of OFDM frames received in the channel.
Noise Floor Avg: The average Noise Floor (in dBm) calculated for the channel.
Noise Floor Max: The maximum Noise Floor (in dBm) calculated for the channel.
4.2.6.2.14.7Spectrum Analysis Information Display - Continuous
The Spectrum Analysis Information Display - Continuous option is available only when the analysis process is active. It enables viewing the continuously updated results of the current analysis process. The displayed information includes the same details available for a regular Spectrum Analysis Information Display option.
4.2.6.2.14.8 Show Spectrum analysis Parameters & Data
The Show Spectrum analysis Parameters & Data option enables viewing the Spectrum analysis test parameters and the last test results.
BreezeACCESS VL System Manual
152
