
Chapter 4 - Operation and Administration
The HW revision of the unit
The Maximum Allowed Tx Power as defined for the applicable
The Maximum EIRP as defined for the applicable
For information on how to view the
The unit calculates the maximum allowed Maximum Tx Power according to the unit properties and parameters listed above, and displays the allowed range when the Maximum Tx Power parameter is selected.
For each modulation level, the unit will use as maximum transmit power the minimum between this parameter and the maximum Tx power allowed by the HW and the Country Code for the specific modulation level.
The default Maximum Tx Power is the highest allowed value.
4.2.6.2.8.2.2Show Maximum Tx Power Parameters
This option displays the Maximum Tx Power parameter and the current maximum Tx power for the different modulation levels.
4.2.6.2.8.3ATPC Parameters in AU
4.2.6.2.8.3.1ATPC Option
The ATPC Option enables or disables the Automatic Transmit Power Control (ATPC) algorithm.
The default is Enable.
4.2.6.2.8.3.2ATPC Minimum SNR Level
The Minimum SNR Level defines the lowest SNR at which you want each SU to be received at the AU (the lower limit of the optimal reception level range).
Available values: 4 to 60 (dB).
Default value: 28 (dB).
4.2.6.2.8.3.3ATPC Delta from Minimum SNR Level
The Delta from Minimum SNR Level is used to define the highest SNR at which you want each SU to be received at the AU (the higher limit of the optimal reception level range):
Max. Level=Minimum SNR Level + Delta from Minimum SNR Level.
BreezeACCESS VL System Manual
144