Alvarion SW VERSION 5.1 system manual Country Code Parameters, Country Code Select

Chapter 4 - Operation and Administration

4.2.6.8Country Code Parameters

4.2.6.8.1Country Code Select

The Country Code Select option enables changing the Country Code used by the unit. In the current release this option is applicable only to units in the 5.4 and 5.8 GHz bands.

The default Country Code is set in factory according to the destination country.

CAUTION

The selected Country Code must comply with applicable local radio regulations.

4.2.6.8.2Re-apply Country Code Values

After loading a new SW version with any changes in the relevant Country Code, the Re-apply Country Code Values option must be activated for the changes to take effect. Following activation of this feature, the unit must be reset to fully apply the changes.

NOTE

Following activation of the Re-apply Country Code Values option, all parameters that are affected by the Country Code (frequency parameters, transmit power parameters, DFS operation, modulation level parameters, burst mode parameters) revert to their factory default values and must be re-configured.

BreezeACCESS VL System Manual

210