Alvarion SW VERSION 5.1 system manual Performance Parameters

Appendix E - Parameters Summary

E.1.6 Performance Parameters

Parameter	Unit		Range		Default	Run-Time
RTS Threshold	AU, SU	HW Revision C or higer: 20-		„ AU HW Revision A, B:		Yes
		4092 (bytes)			2200
		HW Revision A, B: 20-2200.		„ AU HW Revision C or
					higher (except in the
					900 MHz band): 4092
				„ AU in the 900 MHz
					band: 60
				„	SU: 60
Minimum Contention	AU, SU	0, 7, 15, 31, 63, 127, 255, 511,		15		No
Window		1023
Maximum Contention	AU, SU	7, 15, 31, 63, 127, 255, 511,		1023		No
Window		1023
Maximum Modulation	AU, SU	According to the Min/Max		„ 5 for SUs with HW		Yes
Level		Modulation Level defined for			revision F
		the Sub-Band		„	The highest available
					value for the rest of the
					units
Multicast Modulation	AU	According to the Min/Max		The lowest available value		Yes
Level		Modulation Level defined for
		the Sub-Band
Number of HW Retries	AU, SU	1 - 14		10		Yes
Average SNR Memory	AU, SU	-1 to 32		5		Yes
Factor
Burst Mode Option*	AU, SU	„	Disable	Enable		No
		„	Enable
Burst Mode Time	AU, SU	1 to the value defined in the		5 milliseconds or the value		Yes
Interval*		Sub-Band for Maximum Burst		of Maximum Burst Duration
		Duration (milliseconds)		defined for the Sub-Band
				(the lower of the two values).
Adaptive Modulation	AU, SU	„	Disable	Enable		No
Option		„	Enable
Minimum Interval	AU, SU	1-3600 (seconds)		4 (seconds)		Yes
Between Adaptive
Modulation Messages
Adaptive Modulation	AU, SU	„	Normal	Normal		No
Decisión Threshold		„	High
Concatenation Option	AU, SU	„	Disable	Enable		No
		„	Enable
Maximum	AU, SU	„ 256 to 2200 bytes for units		„ 2200 for units with rev A		Yes
Concatenated Frame			with HW revision A or B		or B
Size		„ 256 to 4032 bytes for units		„ 4032 for units with rev C
			with HW revision C or		or higher
			higher

* Applicable only if Burst Mode is supported by the Sub-Band.

BreezeACCESS VL System Manual

232