Menus and Parameters
Operation and Administration
95
SU-54 Support (AUS only): Supported or Not Supported. Indicates whether
the AUS can support SU-54 units (support of SU-54 units by AUS is a
licensed feature available for all AUS units except AUS operating in the 0.9
GHz band).
Wireless Link Prioritization Support (AU only): Supported or Not
Supported. Indicates whether the unit supports the Wireless Link
Prioritization feature (Wireless Link Prioritization is a licensed feature).
4.2.2.2 Show Basic Configuration
The Show Basic Configuration menu is a read only menu that displays the
current values of the parameters included in the Basic Configuration menu.
4.2.2.3 Show Advanced Configuration
The Show Advanced Configuration menu enables to access the read only sub
menus that display the current values of the parameters included in the
applicable sub menus of the Advanced Configuration menu.
4.2.2.4 Show Country Dependent Parameters
Each country has its radio regulation regarding transmissions in the applicable
bands that affect parameters such as available frequencies, bandwidth, transmit
power, etc. Some other parameters and options may also vary among countries.
For each country, one or more sets of parameters are pre-configured in the
factory. If more than one set is available, the set to be used can be selected. The
Show Country Dependent Parameters displays the available set(s) of these
parameters, and includes the following:
Country Code: The up to 3 digits country code according to ISO 3166 and
the country name. Some regulatory requirements apply to more than one
country. In these cases the Country Code includes a 4 digits proprietary
group code and the Country Group name (for example FCC).
Data Encryption Support: Indicates whether data encryption is supported
for the applicable country.
AES Encryption Support: Indicates whether encryption using AES is
supported for the applicable country.
Authentication Encryption Support: Indicates whether authentication
encryption is supported for the applicable country.
For each of the available sets (Sub-Bands), the following information is provided:
Sub-Band ID and Frequencies