Canon 700 Series 4 Specify the destinations ➞ press [Start]

Start

3

Sending Documents

TTI

Selector

Set

4 Specify the destinations ➞ press [Start].

You can specify up to 210 destinations using regular dialing, one-touch speed dialing, coded speed dialing, access code dialing, or directory dialing. (See “Using Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32,or “Using Directory Dialing,” on p. 2-39.)

➞

NOTE

•When entering a number using regular dialing, if you see that you have entered an incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.

• You can also use C (Clear) to clear the entire telephone number ➞ begin entering the telephone number again.

•If you notice that you made a mistake while the machine is dialing the number,

press (Stop) to return to the Standby mode ➞ start again.

•You can press more than one speed dialing key to send the document to more than one location after the timer goes off. If you want to enter the numbers with regular dialing for a sequential broadcast, make sure you press Set (Set) after every number.

➞

5 If you want to select a sender’s name, press [TTI Selector] ➞ [▼] or [▲] until the sender’s name you want to use appears.

You can also use the numeric keys to select a sender’s name.

If you do not want to select a sender’s name, proceed to step 6.

3-30Sending Documents at a Preset Time