Canon 700 Series 1 Place your documents on the machine, 2 Specify the destination ➞ press [Set]

1 Place your documents on the machine.

For instructions explaining how to place your documents, see “Setting the Document on the Machine,” on p. 3-3.

3

Sending Documents

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

2 Specify the destination ➞ press [Set].

Set

You can specify the destination using regular dialing, one-touch speed dialing, coded speed dialing, access code dialing, or directory dialing. (See “Using Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32,or “Using Directory Dialing,” on p. 2-39.)

3 Immediately after pressing [Set] on step 2, open all three one-touch speed dialing panels ➞ press [Subaddress].

Subaddress

NOTE

You must press [Subaddress] within five or ten seconds (depending on the dialing method you use) of pressing Set (Set) in step 2. If you wait longer than the timeout interval before pressing [Subaddress], the machine starts to scan the documents. The timeout interval can be turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)

3-34Sending a Document with a Subaddress/Password