Canon 700 Series manual 260

Feature	Menu Item	Description of Default
ECM Sending/	ECM TX	The machine is set to conduct all transactions using
Receiving	ECM RX	ECM (Error Correction Mode). If transmission speed
		appears to be extremely slow, you may be able to speed
		up transmission time by turning ECM ‘OFF’. (See “TX
		(Send) Settings,” on p. 11-14,or “RX (Receive)
		Settings,” on p. 11-17.)
Energy Saver	ENERGY SAVER	If the machine remains idle for a specified time period, it
		enters the Energy Saver mode. If your machine is idle
		for three minutes, the machine enters the Energy Saver
		mode. (See Chapter 5, “Summary of Important
		Settings,” in the Reference Guide.)
Language	DISPLAY	The initial display language is English. Spanish, French,
	LANGUAGE	and Portuguese are also available. (See Chapter 5,
		“Summary of Important Settings,” in the Reference
		Guide.)
Manual Receiving	REMOTE RX	To start receiving a fax manually by answering an
with an Extension		extension telephone connected to the machine, dial 25.
Telephone		You can change this number if necessary. (See “RX
		(Receive) Settings,” on p. 11-17.)
Offhook Alarm	OFFHOOK ALARM	If the handset remains off the hook, an alarm sounds.
		The volume of this alarm can be adjusted, or it can be
		turned ‘OFF’. (See “User Settings,” on p. 11-5.)
Pause Length	PAUSE TIME	A pause entered within a number is set for two seconds.
		You can lengthen this pause up to 15 seconds. A pause
		entered at the end of a number is fixed at 10 seconds,
		and cannot be adjusted. (See “TX (Send) Settings,” on
		p. 11-14.)
PIN Codes	PIN CODE	The PIN Code feature is disabled unless you turn it ‘ON’
		and set up the machine for dialing through a PBX
		(Private Branch Exchange) with PIN codes. (See “TX
		(Send) Settings,” on p. 11-14.)
Printing: Continue	TONER SUPPLY	When the toner supply runs low, the machine saves the
Printing with Toner	LOW	remainder of the document in memory. You can set the
Supply Low		machine to continue printing even after the <TONER
		SUPPLY LOW> message appears during printing. (See
		“Printer Settings,” on p. 11-19.)
Printing: Footer on	RX PAGE FOOTER	The machine does not print a footer on every document
Printed Documents		received unless you turn this feature ‘ON’. (See “RX
		(Receive) Settings,” on p. 11-17.)
Program One-Touch	PROG 1-TOUCH	If you press the designated one-touch speed dialing key
Key	KEY	under which a function is assigned before you start a
		transmission, the machine automatically performs that
		function. (See “User Settings,” on p. 11-5.)
Receiving Password	RX PASSWORD	No receiving password is set until you set one. If the
		other party regularly sends you documents only with an
		ITU-T password and no subaddress, set up an RX
		password. (See “System Settings,” on p. 11-29.)

Other Special Features

10

How the Machine Operates with Default Settings 10-23