Canon 700 Series 8 Press [Start], press [Password], keys ➞ press [Set], spaces) set on the other party’s machine using the numeric

6

Using a Relay Network

Password	6 If an ITU-T password is required to start the relay broadcast,
	press [Password].

Otherwise, proceed to step 8.

NOTE

You must press [Password] within five seconds of pressing Set (Set) in step 5. If you wait longer than the timeout interval before pressing [Password], the machine starts scanning the document. The timeout interval can be turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)

\

1	2	3	7 Enter the ITU-T password (up to 20 digits, including , #, and
4	5	6
7	8	9	spaces) set on the other party’s machine using the numeric
	0		keys ➞ press [Set].

Set

NOTE

You must enter the correct password, including , #, and spaces, set on the other party’s machine. Otherwise, the other party’s machine cannot receive the document.

Start

8 Press [Start].

The machine starts the transmission.

NOTE

The machine begins scanning the documents automatically if the Timeout feature is set to ‘ON’. (See “TX (Send) Settings,” on p. 11-14.)

6-14Sending a Document to a Relay Unit for Relay Broadcasting