Summary of Important Settings

11

Setting Item

Description

 

 

2. RELAY TX GROUP

Sets up a relay box so your machine can relay document

 

transmissions to other fax machines in your area. (See “Setting

 

Up and Using a Standard Relay Unit,” on p. 6-3.)

1. SETUP FILE

Sets up a relay box.

SET RLY TX GROUP#

00-99

 

Sets a two digit relay group number.

1.GROUP DIAL NAME

Give the relay group a name (up to 24 characters).

2.PASSWORD

0-9999999

 

Assign a password to protect the relay box settings.

3.TRIGGER

Set the trigger to initiate Relay Broadcasting.

1.SUBADDRESS

Enter an ITU-T subaddress (up to 20 digits).

2.SENDER’S FAX NO.

Enter the telephone number of your machine.

3.MAIL ADDRESS (To)

See the Sending Guide.

 

For the LASER CLASS 710, the installation of the optional

 

Network Kit III is necessary to access these items.

4.RX PASSWORD

Enter an ITU-T password (up to 20 digits).

5.SELECT ORIG UNIT

Sets your machine to check the incoming relay command to

 

make sure the originator is registered.

ON

Receives and obeys incoming relay commands for registered

TEL=

originators only. Register originator machines under one-touch

 

speed dialing keys, or coded speed dialing codes.

OFF*

Receives and obeys all incoming relay commands.

6.PRINT RX DOC.

Turns printing ON/OFF for documents received for relay to other

 

machines.

ON

Prints a copy of every document relayed.

# OF RX COPIES

From 01 to 99 COPIES; 01 COPIES*

 

Set the number of document copies to print.

OFF*

No copies are printed.

7.SELECT LOCATIONS

Use one-touch or coded speed dialing to select the fax numbers

TEL=

that will receive the documents relayed from your machine.

 

 

11-24File Settings