Setting Item

Description

 

 

3.TIME SETUP

Sets a time for the machine to start the memory receiving operation.

OFF*

The timer for starting and ending the memory receiving operation is

 

turned ‘OFF’.

ON

The timer for starting and ending the memory receiving operation is

 

turned ‘ON’.

1.START TIME

Set a specified time to start the memory receiving operation.

EVERYDAY*

Set up to five times everyday to start the memory receiving operation.

SELECT DAYS

Select one or several days to start memory receiving. You can set up

 

to five times for any of the selected days.

2.END TIME

Set a specified time to end the memory receiving operation.

EVERYDAY*

Set up to five times everyday to end the memory receiving operation.

SELECT DAYS

Select one or several days to end memory receiving. You can set up

 

to five times for any of the selected days.

 

 

2. RX PASSWORD

Set an RX password to match the ITU-T password of all incoming

 

documents.

 

Enter an ITU-T password (up to 20 digits). To receive a

 

document, this RX password must match the ITU-T password of

 

the incoming document.

 

After the RX password has been set, all incoming documents

 

must have a matching ITU-T password.

 

 

3. PHONE NO. CHECK

Enables you to prevent sending a document to an unintended

 

destination. The number you dial is checked with the registered

 

number. If the numbers match, the document is sent.

OFF*

The number is not checked.

ON

The machine uses the last six digits of the number you dial, and

 

matches it with the last six digits of the other party’s number

 

registered on the remote machine. If the numbers match, the

 

document is sent. Otherwise, the document is not sent.

 

 

Summary of Important Settings

11

System Settings

11-31