Canon 700 Series [Set], set an ITU-Tsubaddress, press [Set] ➞ [Subaddress], 7 If an ITU-Tpassword is required, press [Password]

8

Using Polling

NOTE

•When entering a number using regular dialing, if you see that you have entered an incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.

• You can also use C (Clear) to clear the entire telephone number ➞ enter the telephone number again.

•If you notice that you made a mistake while the machine is dialing the number,

press (Stop) to return to the Standby mode ➞ start again.

•You can also select a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

Set	5 If you want to receive a document from a fax machine that has
	set an ITU-T subaddress, press [Set] ➞ [Subaddress].

Subaddress

If you want to receive a document from a fax machine which does not have an ITU-T subaddress/password set, proceed to step 9.

➞

NOTE

You must press [Subaddress] within five seconds of pressing Set (Set). If you wait longer than the timeout interval before pressing [Subaddress], the machine starts dialing the number. The timeout interval can be turned ‘OFF’. (See “TX (Send)

Settings,” on p. 11-14.)

1	2	3	6 Enter the ITU-T subaddress using the numeric keys ➞ press
4	5	6	[Set].
7	8	9
	0

➞

Set

NOTE

You must enter the correct subaddress, including , #, and spaces, set on the other party’s machine. Otherwise, your machine cannot start polling.

Password 7 If an ITU-T password is required, press [Password].

Otherwise, proceed to step 9.

8-4Polling Other Fax Machines to Receive a Document