Canon 700 Series 16 Press [▼] or [▲] to select a preset time number (1 to 5) ➞ press [Set]

1	2	3
4	5	6
7	8	9
	0

Set

Set

Set

1	2	3
4	5	6
7	8	9
	0

Set

NOTE

•If you want to use access code dialing, you have to register an access code (from two to five digits) that represents the group dial you are registering.

•To use access code dialing, you need to set ACCESS CODE to ‘USE’ from the SYSTEM SETTINGS menu, and set up the access code key. (See “Setting Up the Access Code Key,” on p. 2-29.)

14 Enter an access code (from two to five digits) using the numeric keys ➞ press [Set].

➞

15 If you want to set the time for the group transmission, press [▼] or [▲] until <2.TX TIME SETTNG> appears ➞ press [Set].

If you do not want to perform this setting, proceed to step 19.

➞

NOTE

•You can set up to five different times in a 24-hour period for sending.

•If you set the timer for a group dial, every document you send using this group dial is sent at the same time everyday.

16 Press [▼] or [▲] to select a preset time number (1 to 5) ➞ press [Set].

➞

17 Enter the time in 24-hour notation using the numeric keys (e.g., 1:00 p.m. as 13:00) ➞ press [Set].

➞

The message <DATA ENTRY OK> appears on the LCD display for a few seconds.

2

Using Speed Dialing

Setting Up Group Dialing 2-27