Canon 700 Series [Set], [Set], keys ➞ press [Set], spaces) using the numeric keys ➞ press [Set], 14 Press [▼] or [▲] until <4.TX PASSWORD> appears ➞ press

Set	12 Press [▼] or [▲] until <3.SUBADDRESS> appears➞ press
	[Set].

➞

1	2	3	13 Enter an ITU-T subaddress (up to 20 digits) using the numeric
4	5	6	keys ➞ press [Set].
7	8	9

0	This is the ITU-T standard subaddress. An ITU-T subaddress is a number of up
	to 20 digits long which can include spaces, and the symbols and #.
Set

➞

NOTE

• If you make a mistake while entering the subaddress, press C (Clear) ➞ enter the correct subaddress.

• You cannot enter a subaddress that is already in use.

14 Press [▼] or [▲] until <4.TX PASSWORD> appears ➞ press

Set

			[Set].
			If you do not want to enter the ITU-T password, proceed to step 16.
			➞
1	2	3	15 Enter an ITU-T password (up to 20 digits, including , #, and
4	5	6	spaces) using the numeric keys ➞ press [Set].
7	8	9
	0
			➞

Set

NOTE

If you register a TX password, it must match the ITU-T password attached to the other party’s polling request.

8

Using Polling

Setting Up Polling Sending 8-17