Dialing with a PIN Code after the Number

If you set <NECESS. PIN CODE> of the PIN Code setting to ‘OFF’, you can perform the procedure described below. (See “Setting a PIN Code,” on p. 10-6.)

1 Place your documents on the machine.

For instructions explaining how to place your documents on the machine, see “Setting the Document on the Machine,” on p. 3-3.

Other Special Features

10

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

1

2

3

2 Enter the telephone number using the numeric keys.

4

5

6

 

7

8

9

 

 

0

 

 

3 Open all three one-touch speed dialing panels ➞ press [Pin Code].

Pin Code

Set

4 Press [Set].

NOTE

Repeat steps 2 through 4 for each telephone number in a sequential broadcast. In a sequential broadcast, you must dial the second destination within five seconds of dialing the first destination. All subsequent destinations must be specified within 10 seconds of each other. For details about sequential broadcasting, see “Sequential Broadcasting to More Than One Location,” on p. 3-26.

10-8Setting Up and Using PIN Codes