Canon 700 Series 15 Press [▼] or [▲] to select a preset time number (1 to 5) ➞ press [Set]

1 2 3

4 5 6

7 8 9

0

Set

Set

Set

NOTE

•If you want to use access code dialing, you have to register an access code (from two to five digits) that represents the telephone number you are registering for one-touch speed dialing.

•To use access code dialing, you need to set ACCESS CODE to ‘USE’ from the SYSTEM SETTINGS menu, and set up the access code key. (See “Setting Up the Access Code Key,” on p. 2-29.)

13 Enter an access code (from two to five digits) using the numeric keys ➞ press [Set].

➞

14 If you want to set the time for the transmission, press [▼] or [▲] until <2.TX TIME SETTNG> appears ➞ press [Set].

If you do not want to perform this setting, proceed to step 18.

➞

NOTE

•You can set up to five different times in a 24-hour period for sending.

•If you set the timer for a one-touch speed dialing key, every document you send using this key is sent at the same time everyday.

15 Press [▼] or [▲] to select a preset time number (1 to 5) ➞ press [Set].

➞

2

Using Speed Dialing

Setting Up One-Touch Speed Dialing 2-9