Canon 700 Series 6 Press [Set], numeric keys ➞ press [Set], Open all three one-touchspeed dialing panels, Press [Advanced Communication] ➞ press [Set] twice

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

		2	Open all three one-touch speed dialing panels.
Advanced		3	Press [Advanced Communication] ➞ press [Set] twice.
Communication
			➞
	Set
1	2	3 4	Enter the two digit number of the polling box using the
4	5	6	numeric keys ➞ press [Set].
7	8	9
	0		➞
	Set
Selector		5	If you want to select a sender’s name, press [TTI Selector] ➞
TTI
			[▼] or [▲] until you see the sender’s name you want to use.
	Set		If you do not want to select a sender’s name, proceed to the next step.

6 Press [Set].

Set

The document is scanned into the polling box.

NOTE

If another party polls your machine to receive a document stored in your polling box, the document is sent if the following conditions are met:

-If a subaddress and a password was entered when you created the polling box, the subaddress and password attached to the other party’s polling request must match the subaddress and the password of the polling box.

-The password setting is optional. However, if you have registered a password for the polling box, the other party’s polling request must contain a matching password.

-If no password is registered for the document in the polling box, and the other party’s polling request contains a password, then the document will not be sent.

8

Using Polling

Setting Up Polling Sending 8-19