NOTE

Keep in mind these important points about pauses:

-A pause entered within a number (p) is two seconds long.

-You can add consecutive pauses (pp) by pressing [Redial/Pause]. Each additional pause adds two seconds to the pause time.

-You can change the length of a pause entered within a number. (See “Adjusting the Length of a Pause,” on p. 2-3.)

-A pause at the end of a number (P) is 10 seconds long.

-You may have to insert one or more pauses at the end of a number to dial an overseas number.

-You cannot insert a pause when you dial using the numeric keys after pressing

(Hook), or after picking up the handset.

Adjusting the Length of a Pause

Follow this procedure to adjust the length of a pause entered within a number.

NOTE

This procedure is effective only for adjusting the length of pauses entered within telephone numbers. The 10 seconds pause entered at the end of a number cannot be adjusted.

 

1

Open all three one-touch speed dialing panels.

Data

2

Press [Data Registration].

Registration

2

Using Speed Dialing

Set

Set

3 Press [▼] or [▲] until <3.FAX SETTINGS> appears ➞ press [Set].

➞

4 Press [▼] or [▲] until <3.TX SETTINGS> appears ➞ press [Set].

➞

Read This Before Entering Telephone Numbers

2-3