The SETUP FILE menu includes the following items:

Setting

 

 

Description

 

 

 

 

 

 

 

 

1.GROUP DIAL NAME

Name (24 characters)

 

Enter a name for the relay group. The name can be up to 24

 

characters long. Then, press [Set].

 

 

 

 

 

 

 

 

2.PASSWORD

0-9999999

 

 

 

 

 

 

Enter a password (up to seven digits) to protect the relay box settings

 

you are about to set up. After you set a password, you will have to

 

enter it every time you want to view or change these settings. Enter a

 

password, and press [Set].

 

 

 

 

 

 

 

 

3.TRIGGER

 

 

 

 

 

 

 

1.SUBADDRESS

This is the ITU-T subaddress. Enter a number up to 20 digits long (it

 

can include spaces and the symbols

 

and #). The OPTIONAL

 

 

 

SETTINGS for the speed dialing key or code under which the

 

originator fax machine's telephone number is registered must be set to

 

‘OFF’.

2.SENDER’S FAX NO.

Enter the sender’s telephone number using one-touch or coded speed

 

dialing.

3.MAIL ADDRESS(To)

See the Sending Guide.

 

For the LASER CLASS 710, the installation of the optional Network Kit

 

III is necessary to access these items.

 

 

 

 

 

 

 

 

4.RX PASSWORD

20 digits (

 

, #, spaces)

 

 

If your machine is the relay unit, this ITU-T password must match the

 

ITU-T password of the document sent from the originator in order for

 

your machine to receive the document. Otherwise, your machine will

 

not receive the document. Enter a number up to 20 digits long (it can

 

include spaces and the symbols

 

and #).

 

 

 

 

 

 

 

 

 

 

5.SELECT ORIG UNIT

If your machine is the relay unit, this feature forces your machine to

 

check the identity of the originator before it receives the document,

 

and relays it to other fax machines.

ON

If your machine receives a document for relay, it will check the identity

 

of the originator before it receives the document. In order for this

 

feature to perform correctly, the telephone number of the originator

 

unit must be registered for speed dialing on your machine.

TEL =

Press the one-touch speed dialing key, or press [Coded Dial] followed

 

by the three digit code where the number for the originator machine is

 

registered ➞ press [Set].

OFF*

Your machine will receive a document for relay without checking the

 

identity of the originator.

 

 

 

 

 

 

 

 

6.PRINT RX DOC.

If your machine is the relay unit, this setting determines if your

 

machine prints a copy of every document that it relays.

 

 

 

 

 

 

 

 

6

Using a Relay Network

Setting Up and Using a Standard Relay Unit

6-5