Troubleshooting

13

Receiving Documents

Cannot receive documents automatically.

Cause

<MAN.> is displayed.

 

 

Remedy

Set RECEIVE MODE to ‘AUTO RX’ from the RX SETTINGS menu. (See

 

Chapter 4, “Receiving Documents.”)

Cannot receive documents manually.

Cause 1 There is a document set in the ADF (Automatic Document Feeder).

Remedy

You cannot receive if there is a document set in the Automatic Document

 

Feeder. Remove the document and try again.

 

Cause 2

<AUTO> is displayed.

 

 

Remedy

Set the RECEIVE MODE to ‘MANUAL RX’ in the RX SETTINGS menu. (See

 

“Receiving Documents Manually,” on p. 4-4.)

 

 

Cause 3

You pressed [Start] after you hung up the handset.

 

 

Remedy

When you hear a high pitched tone, press [Start] before you hang up the

 

handset. Review the procedure for manual receiving with the optional handset

 

kit installed on the machine. (See “Receiving Documents Manually,” on p. 4-4.)

The documents you receive are of poor quality.

Cause 1 Your toner cartridge is running low on toner.

Remedy Remove your toner cartridge and rotate it five or six times to evenly distribute the remaining toner, and try receiving the document again. If this does not solve the problem, you should change the toner cartridge. (See Chapter 6, “Maintenance,” in the Reference Guide.)

Cause 2 The other fax machine is not functioning properly.

Remedy The sending fax machine usually determines the image quality. Try copying a document on your own machine. If the copy is clean, then the other fax machine has a problem. Call the other party and ask them to clean the scanning glass on their fax machine.

Cannot receive a confidential document in your confidential mailbox.

Cause

The other party’s fax machine does not support ITU-T subaddress/password

 

transactions.

13-18When Trouble Occurs