Canon 700 Series manual 288

Setting Item	Description
8.TX REPORT	Sends a TX report from your machine (the relay unit) to the
	originator of the transmission.
TRANSMIT*	Transmits a document relay report to the originator.
NOT TRANSMIT	No report is transmitted to the originator.
9.TX START TIME	Sets the machine to hold the document from the originator, and
	then relay it at a specified time. Use 24-hour notation to set up to
	five times for transmission.
10.RELAY B’CAST	Turns ‘ON’ and ‘OFF’ relay broadcasting temporarily.
ON*	In order for relay broadcasting to occur, this setting must be ‘ON’.
OFF	Turns relay broadcasting OFF temporarily without canceling or
	changing the relay box settings.
2. CHANGE DATA	Change or add settings to the relay box.
SET RLY GROUP TX#	Enter the number of the relay box you want to change.
PASSWORD	Enter the password protecting the relay box settings.
	You can now change any of the settings listed above in
	1.SETUP FILE.
3. DELETE FILE	Delete a relay box and all of its settings.
SET RLY TX GROUP#	Enter the number of the relay box you want to delete.
PASSWORD	Enter the password of the relay box you want to delete.
3. PRESET POLLING	Sets up preset polling sending/receiving settings. (See “Polling
	to Receive at a Preset Time,” on p. 8-5.)
1. SETUP FILE	Sets up a preset polling box.
SET BOX #	00-99
	Create a two digit preset polling box number.
1.FILE NAME	Enter a name for the preset polling box (up to 24 characters).
2.PASSWORD	0-9999999
	Enter a password (up to seven digits) to protect the preset
	polling box settings.
3.SELECT LOCATIONS	Select the numbers of the fax machines you want to poll.
TEL=	Use one-touch or coded speed dialing to specify the numbers
	of the fax machines you want to poll.

Summary of Important Settings

11

File Settings 11-25