Canon 700 Series manual 279

Summary of Important Settings

11

Setting Item	Description
5. TIME OUT	Sets the interval between dialing (entering phone numbers) when
	sending to more than one destination. (See “Sequential Broadcasting
	to More Than One Location,” on p. 3-26.)
ON*	The machine scans the document in five or ten seconds after you
	enter the telephone number.
OFF	Press [Start] to begin transmission. Otherwise, the machine returns to
	the Standby mode.
6. STAMP ACTION	Select whether to stamp every document you send, or only
	documents sent using direct or memory sending. This setting is
	available only after installing the optional Stamp Kit on your machine.
DIRECT & MEMORY TX*	Stamps documents sent using direct and memory sending.
DIRECT TX	Stamps documents sent with direct sending only.
7. PIN CODE	Sets the PIN code feature for dialing through a PBX that requires PIN
	codes. (See “Setting Up and Using PIN Codes,” on p. 10-6.)
OFF*	Turns ‘OFF’ the PIN code feature.
ON	Turns ‘ON’ the PIN code feature.
NECESS. PIN CODE	Forced PIN Code feature requires entering a PIN code for every
	transaction.
OFF*	Forced PIN code access is turned ‘OFF’. If you want to enter the PIN
	code, press [Pin Code] before/after entering the telephone number.
ON	The Forced PIN code access is turned ‘ON’. You must enter a PIN
	code every time you dial.
PIN CODE BEF/AFT	Sets the PIN code to appear as a prefix or suffix of the telephone
	number.
BEFORE TEL NO.*	The PIN code appears as a prefix.
AFTER TEL NO.	The PIN code appears as a suffix.

An asterisk (*) indicates the default setting.

11-16TX (Send) Settings