Canon 700 Series manual 147

5

Using the Machine as a Copier

IMPORTANT

Do not set the document guides so tight against the sides of the document, that the document bends.

3 Make sure the documents are below the load limit marks for A4/LTR or B4/LGL sizes.

4 Insert the documents fully into the feeder until the leading edges of the documents stop.

The following messages appear on the LCD display:

NOTE

If the machine already displays <DOCUMENT READY> before you set your document, a small-sized document, such as a STMT document, may have remained in the automatic document feeder from a previous fax or copy job. In such a case, remove the small-sized document from the automatic document feeder, and set your document. (See Chapter 7, “Troubleshooting,” in the Reference Guide.)

5-4Setting a Document on the Machine