Canon 700 Series Using the Telephone, 1 Pick up the handset, or press [Hook], 2 When you hear the dial tone, specify the destination

Using the Telephone

Follow this procedure to use the telephone for voice communication if you have installed the optional handset kit. (See Chapter 1, “Before You Start Using This Machine,” in the Reference Guide.)

Other Special Features

10

1 Pick up the handset, or press [Hook].

Hook

2 When you hear the dial tone, specify the destination.

You can specify the destination using regular dialing, one-touch speed dialing, coded speed dialing, access code dialing, or directory dialing. (See “Using Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32,or “Using Directory Dialing,” on p. 2-39.)

NOTE

•When entering a number using regular dialing, if you see that you have entered an incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.

• You can also use C (Clear) to clear the entire telephone number ➞ begin entering the telephone number again.

•If you notice that you made a mistake while the machine is dialing the number,

press (Stop) to return to the Standby mode ➞ start again. You can also press

(Hook) or hang up the handset to cancel dialing.

10-2Using the Telephone