Canon 700 Series Dialing with a PIN Code before the Number, Press [Start], 7 Press [Set], using the numeric keys, 1 Place your documents on the machine

Start5

Press [Start].

NOTE

To enter the PIN code immediately, press (Start). Otherwise, the machine waits five seconds before it displays <ENTER PIN CODE>. This timeout feature can be turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)

1	2	3	6 Enter the PIN code (up to 20 digits, including , #, and spaces)
4	5	6
			using the numeric keys.
7	8	9
	0		The PIN code is not displayed as you enter it.

Set	7 Press [Set].
	Transmission starts.

Dialing with a PIN Code before the Number

If you set <NECESS. PIN CODE> of the PIN Code setting to ‘OFF’, you can perform the procedure described below. (See “Setting a PIN Code,” on p. 10-6.)

1 Place your documents on the machine.

For instructions explaining how to place your documents on the machine, see “Setting the Document on the Machine,” on p. 3-3.

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

Other Special Features

10

Setting Up and Using PIN Codes 10-9