9-13
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Repo rt and Wingz Report Configuring Summary Reports
When you select Prev Hour, Prev Day, or Prev Week, the Start Date/Start Time fields are inactive,
and when the Stop Date/Stop Time fields are blank, they are populated with the current date and time.
When you modify the stop date/time, the modified value is used for the plot duration. When you select
TOD, both Start Date/Start Time and Stop Date/End Time fields are activated, and the Stop
Date/End Time fields are populated with the current date and time.

Start Date/Start Time

Specify the starting date and time for the graph in this field.

Stop Date/End Time

Specify the stop date and tim e for the graph in this field.

Cumulation Period

Click on the appropriate but to n ( Hourly, Daily, or Weekly ) to set the report’s plot interval. The default
selection is Hourly.

Result Pane

The Result Pane displays status and error messages:

Plot Button

Click on this button to initiate th e plotting of the report. The data an d graphs are displayed in the Repor t
Application window.When statistic entries are not found, an error message is displayed in the Result
pane. Otherwise, t he Result pane displays the number of entries found.

Cancel Button

Click on this button to cancel the current report filter operation and close this window.
Connection Traffic Dropped Window
The Connection Traffic Dropped window is displayed when you select the Performance Data menu’s
Connection Traffic Dropped option from the Connection submenu in the Performance Data’s menu,
as shown in Figure 9-6. You must select a PVC and plotting time inter val, th en cli ck on the Plot button
to have the statistical informa tion pertaining to the total tr affic dropped for a selected PVC, plotted into
graphs for both ends of the connection and displayed in the Report Application window.