62
| CHAPTER 6 |
USING INPUT EFFECTS
Please select a
channel source before
choosing an Input
To apply a parameter value:
1Press EFFECTS or one of the input effects buttons to display the Input Effects menu.
2If you haven’t already done so, use the ARROW keys or EFFECTS button to select the desired Input Effect to which you want to apply parameter values.
3Set the parameter value to 0 (zero) to turn it OFF, or to 1 to turn it ON.
4Use one of the NEXT buttons to select the source to which you want to apply the effect. For example, press NEXT/B to apply the effect to channel B.
5Type the parameter value on the
6Press OK to exit from Input Effects mode.
7You can also use the Input Effects Menu to access the Video Adjustment Menu for Brightness, Contrast, Color Saturation, and Hue. Use one of the NEXT buttons to select the source to which you want to apply the adjustments. Use the ARROW keys to select the Video Adjustment option. Press OK to go to the Video Adjustment Menu. You can also press SHIFT+PLAY to go straight to the Video Adjustment Menu from any other menu. To reset to the original factory settings, press the SHIFT then OK button.
8Inside the Video Adjustment menu, select the proper video adjustment (Brightness, Contrast, Color Saturation, and Hue) with the LEFT/RIGHT ARROW keys. Once you have selected the video adjustment, make the proper adjustments with the UP/DOWN ARROW keys or with the
The