HP 8000 s manual Message Description Recommended Action, = EIO Slot Number

Message	Description	Recommended Action
****************	Displayed during startup as	No action is required.
	the individual tasks begin
	initializing.
13.xx Paper Jam	A staple jam occurred.	Open the Stapler door, and
alternates with		clear the paper or staple jam.
STKR: DETACH AND
CLEAR STAPLE JAM
20 INSUFFICIENT	More data has been received	To continue printing, press
MEMORY	from the computer than fits in	GO. Only the amount of data
	the printer's internal memory.	that fits in the printer's internal
		memory is printed.
		Reduce the page complexity
		or add more memory, then
		print the page again.
22 EIO [n]	The EIO buffer has	The current data in the print
BUFFER OVERFLOW	overflowed during a busy	buffer will be lost. No action is
	state.	required.
22 PARALLEL IO	Indicates the parallel buffer	Printing can continue, but
BUFFER OVERFLOW	has overflowed.	some data might be lost.
40 EIO N BAD	An EIO accessory connection	Check that all cables are
TRANSMISSION	has been abnormally broken.	connected to the EIO ports
		and that the EIO board is
	N = EIO Slot Number	seated properly. If possible,
	1 = Bottom EIO Slot	print to another network
	2 = Top EIO Slot	printer to verify the network is
		working properly. All data in
		the print buffer will be lost.
41.2	Indicates that a laser scanner	Open and close the front door
PRINTER ERROR	error has occurred.	of the printer to remove any
		remaining pages from the
		printer. Reprint the job. If the
		problem persists, turn the
		printer off and on to reset the
		printer.

130 7 Printer Control Panel Messages EN