HP 8000 s manual Printing from Tray 1, Selecting the Display

Message	Description	Recommended Action
CLEAR UNEXPECTED	The printer senses a media	Open the upper right door,
PAPER SIZE JAM	jam in tray 1.	remove the jammed media,
THEN LOAD TRAY 1		and close the door. Load the
<Type> <Size>	<Type> is the media type	media type and size indicated
	specified in the printer driver	on the printer control panel.
	or application.	For more information on
	<Size> is the media size	loading media into tray 1, see
	specified in the printer driver	“Printing from Tray 1” in
	or application.	chapter 3. For more
		information on clearing jams,
	The <Type> and <Size> can	see the quick reference guide.
	be the default media type and
	size if an automatic paper
	override has occurred.
CLEARING PAPER	The printer is attempting to	No action is required.
FROM PRINTER	remove unusable media (such
	as a misfed page or media
	damaged in a media jam).
CLOSE	The printer senses that one of	Close the door indicated in the
<Location> DOOR	the doors is not closed	message.
	properly.
	<Location> is one of the
	printer doors.
COLD RESET	The printer has recognized	No action is required. For
	the key sequence for	more information on factory
	performing a cold reset. The	default settings, see “Factory
	printer will reset to the factory	Defaults” in chapter 2.
	default settings.
CONFIG LANGUAGE	The printer has recognized	Wait for the display language
	the key sequence for	options to appear and select
	selecting the display	the appropriate language. For
	language.	more information on selecting
		the display language, see
		“Selecting the Display
		Language” in chapter 2.

142 7 Printer Control Panel Messages EN