HP 8000 s manual Options, and Related

Message	Description	Recommended Action
FUSER LIFE LOW	The fuser and paper rollers	Although printing can
REPLACE KIT	are almost past their specified	continue, the fuser should be
	life.	replaced for optimum printer
		operation. For more
		information on replacing the
		fuser, see the installation
		guide included with the fuser
		kit.
FUSER LIFE OUT	The fuser and paper rollers	Replace the fuser kit and
REPLACE KIT	are past their specified life.	reset the fuser counter before
		attempting to print. For more
		information on replacing the
		fuser kit and resetting the
		counter, see the installation
		guide included with the fuser
		kit. For more information on
		configuring the printer
		response to this message,
		see “Selecting Toner Low
		Response” in chapter 2.
INCORRECT FUSER	The printer has detected that	Remove the fuser and install
LOWER LEFT DOOR	an incompatible fuser	the fuser specified for use with
	(possibly the wrong voltage of	this printer. Printing cannot
	fuser for the printer) has been	continue until the correct fuser
	installed.	is installed in the printer. For
		information on ordering a
		fuser kit, see “Accessories,
		Options, and Related
		Products” in chapter 8.
INPUT DEVICE	The media transfer door on	Close the media transfer door.
PAPER PATH OPEN	tray 4 is open.

146 7 Printer Control Panel Messages EN