HP 8000 s manual Stacker Bin is full Empty the Stacker Bin Alternates with

Message	Description	Recommended Action
OUTPUT BIN FULL	The bin-full sensor in the left	Empty the Face-up Bin.
alternates with	Face-up Bin has been
	reached.
CLEAR PAPER FROM
FACE UP
OUTPUT BIN FULL	The Stacker Bin is full.	Empty the Stacker Bin.
alternates with
CLEAR PAPER FROM
OPTIONAL BIN 1
PCL MEMORY FULL	The resource save area for	Turn the printer off and on to
STORED DATA LOST	the printer personality is full.	clear the printer's RAM.
	Fonts downloaded to the
	printer's RAM might have
	been deleted.
PJL OPERATIONS	The requested PJL operation	No action is required.
FAILED	could not be completed
	because the option is
	unavailable or the PJL data
	was corrupt.
PLEASE WAIT	The printer is in the process	No action is required.
	of going offline or into the
	menus.
POWERSAVE ON	The printer is in Power Save	Clear this message by
	mode.	pressing any key.
PRESS SELECT IF	The printer has detected that	If the fuser has been replaced,
FUSER IS NEW	a new fuser has been	press SELECT to reset the
	installed.	internal counter. If the fuser
		has not been replaced, press
		GO.
PRESS SELECT IF	The printer has detected that	If the transfer drum has been
TRANSFER IS NEW	a new transfer drum has been	replaced, press SELECT to
	installed.	reset the internal counter. If
		the transfer drum has not
		been replaced, press GO.

EN Printer Messages 151