HP 8000 s manual 36 2 Using the Printer Control Panel

Menu	Item	Factory Default
COLOR ADJUST	PRINT
MENU	TEST PAGE
	BLACK SMOOTH	0
	VALUE=
	CYAN SMOOTH	0
	VALUE=
	MAGENTA SMOOTH	0
	VALUE=
	YELLOW SMOOTH	0
	VALUE=
	BLACK DETAIL	0
	VALUE=
	CYAN DETAIL	0
	VALUE=
	MAGENTA DETAIL	0
	VALUE=
	YELLOW DETAIL	0
	VALUE=

a.Appears only if the printer has a disk installed.

b.Appears only if an EIO card is installed and an EIO page exists.

c.QUICK COPYJOBS MENU and PRIVATE/JOBS MENU only appear if disk is installed and at least one job is in the queue.

d.Appears only if tray 2 is properly installed.

e.Appears only if tray 4 is properly installed.

f.Appears only if the optional duplexer is installed.

g.Appears only if the optional duplexer is installed and DUPLEX is set to ON.

h.Appears only if NEW TONER = YES.

i.Initialize functions only appear if appropriate disk is installed.

j.This setting will default to A4 in some countries/regions.

k. UNIT OF MEASURE, X DIMENSION, and Y DIMENSION only appear if CONFIGURE CUSTOM is set to YES.

l.Tray 2 items appear only if tray 2 is installed.

m.Tray 4 items appear only if tray 4 is installed.

n.Appears only if appropriate device (EIO) menu exists.

36 2 Using the Printer Control Panel EN