HP 8000 s manual Printer is requesting a Load the requested media

Message	Description	Recommended Action
MANUALLY FEED	The printer is requesting a	Load the requested media
<Type> <Size>	sheet of media or envelope to	type and size into tray 1. If the
	be manually fed.	proper media size is already
		loaded into tray 1, press GO to
	<Type> is the media type	initiate printing. For more
	specified in the printer driver	information on loading media
	or application.	in tray 1, see “Printing from
	<Size> is the media size	Tray 1” in chapter 3.
	specified in the printer driver
	or application.
MEMORY SHORTAGE	The printer is compressing	If possible, simplify the print
PAGE SIMPLIFIED	the print job so that all of the	job by lowering the resolution
	job will fit into the available	of graphics. Or, install more
	printer memory. The print	printer memory. For more
	job's appearance might be	information on printer memory
	altered by the compression of	options, see “Accessories,
	the data.	Options, and Related
		Products” in chapter 8.
NEW TONER	This message will appear if	Change to YES and press
CARTRIDGE? = NO	the printer senses that a	SELECT if you just installed a
	TONER LOW or TONER OUT	toner cartridge.
	message has appeared and	Press ITEM+ until you see
	then gone away, indicating
		NEW TONER=
	that a new toner cartridge
		BLACK.
	may have been installed.
		Press VALUE+ until the new
		cartridge appears, then press
		SELECT.
NO JOB	CANCEL JOB was pressed and	No action is required.
TO CANCEL	there is no job to cancel.
OFFLINE	The printer is offline. No error	Press GO to bring the printer
	messages are pending.	online.
OUT OF MEMORY	The printer personality for the	Reprint the job. If the
JOB CLEARED	current job could not be run in	message still appears, turn
	the available memory. The job	the printer off and on to reset
	was canceled, and no pages	the printer before sending the
	were printed.	print job again.

150 7 Printer Control Panel Messages EN