HP 8000 s manual Size that is not currently Specified on the printer control

Message	Description	Recommended Action
TRAY X LOAD	A user has requested a media	Load the media type and size
<Type> <Size>	size that is not currently	specified on the printer control
CHECK CONTROL	installed or configured in the	panel display, and configure
PANEL SETTING	printer. This message is also	the media type in the printer
	generated when the current	control panel. After the
	input tray runs out of media	requested input tray is loaded,
	and no other auto-selectable	the printer automatically goes
	input trays contain that size of	online.
	media.
		Pressing GO will cause the
	X is the input tray number.	printer to attempt to print the
	<Type> is the last media type	page on the default type and
	configured for the input tray.	size media.
	<Size> is the last media size
	configured for the input tray.	If the condition persists, check
		the input tray type and size
		configuration in the printer
		control panel. The correct
		media type and size might be
		loaded in the input tray, but
		the printer will not recognize
		that the media is loaded if the
		printer control panel settings
		do not match the media type
		and size requested.
		For more information on
		configuring input trays, see
		“Configuring Media Type and
		Size” in chapter 2.
TRAY X OPEN	An input tray is open.	Close the input tray before
		resuming printing.
	X is the input tray number.

158 7 Printer Control Panel Messages EN