HP 8000 s manual Resetting the Printer, To reset the printer to factory defaults

Resetting the Printer

Use the procedures below to reset the printer to the factory defaults listed in the table following this section.

To reset the printer to factory defaults

1Press MENU until INFORMATION MENU appears on the printer control panel display.

2Press ITEM until PRINT CONFIG PAGE appears on the display.

3Press SELECT to print the page.

4Press MENU until RESETS MENU appears on the display.

5Press ITEM until FACTORY DEFAULT RESET appears on the display.

6Press SELECT. The printer will reset all factory defaults.

Note	Resetting the printer to factory defaults clears all print jobs from the
	print buffer. After resetting the defaults, reprint any lost print jobs.
	7	Reset the EIO type and configure the printer, if necessary.
	8	Press GO to bring the printer online.
	9	Use the printer configuration page to reconfigure the printer.

EN When to Use the Printer Control Panel Menus 31