Message | Description | Recommended Action |
|
|
|
56.2 ERROR | Indicates an illegal output | Open the printer and remove |
CYCLE POWER | error. For example, the | media from the paper path. |
| Verify that the media type is | |
| installed and it was selected | set in the printer control panel. |
| as the output destination, or | Turn the printer off and on to |
| there are transparencies in | reset the printer. If the |
| the duplexer. | condition persists, contact a |
|
| local authorized HP dealer or |
|
| service representative for |
|
| service. For more information |
|
| on configuring input trays, see |
|
| “Configuring Media Type and |
|
| Size” in chapter 2. |
|
|
|
57.X FAN FAILURE | One of the cooling fans has | Turn the printer off and then |
| failed. | on to reset the printer. If the |
|
| message reappears, contact a |
| X = Fan Type | local authorized HP dealer or |
| 1 = Rear Output Fan | service representative for |
| (Motor 1) | service. Do not operate the |
| 2 = Rear Input Fan (Motor 2) | printer in this condition or |
| 3 = Left Output Fan (Motor 3) | the printer can be seriously |
|
| damaged. |
|
|
|
58.1 ERROR | Indicates that the paper | Open the upper right door and |
CYCLE POWER | diverter inside the upper right | check for a media jam or |
| door is out of position, | misfed media. Turn the printer |
| causing an error feeding | off and on to reset the printer. |
| media from tray 1. | If the message reappears, |
|
| contact a local authorized HP |
|
| dealer or service |
|
| representative for service. |
|
|
|
59.X MOTOR ERROR | Indicates that the main printer | Turn the printer off and on to |
CYCLE POWER | motor is not working properly. | reset the printer. If the |
|
| condition persists, contact a |
| X = Description | local authorized HP dealer or |
| 0 = General Error | service representative for |
| 1 = Startup Error | service. |
| 2 = Rotation Error |
|
|
|
|
EN | Printer Messages 135 |
