Orienting Media for All Other Trays later in this chapter

5Adjust the left media guide by pushing it in (A) and lifting up and out

(B).

Note

Lift here (C) to remove paper from the tray.

6Position the left media guide over the correct media size marked on the input tray.

7Press the left media guide into the rear slot (D), and then lower it down

(E) into the front slot (F). Verify the guide is not skewed.

8Load up to 500 sheets of 20 lb

(75 g/m2) bond paper in the input tray. For information on loading different types of media, see

“Orienting Media for All Other Trays” later in this chapter.

CAUTION

Do not fill the input tray above the media-fill mark. Excessive media in the input trays can cause media jams.

EN	Printing from Trays 2 (some printer models only) and 3 81