HP 8000 s manual Application Problems

Application Problems

Problem	Cause and Solution
Cannot change system	The correct printer driver is not loaded. Load the correct
selections through	printer driver.
software
Cannot select a font in	The correct printer driver is not selected. Select the
the application	correct printer driver.
	The font is not available in your application. Use a font
	manager utility to add the font.
	If you have downloaded a font on the printer hard disk
	and you do not see the font in the application, see the
	download program (such as EuroForm or other font
	management utilities) help for more information.
	Print a disk directory page to see if the font has been
	downloaded to the printer hard disk. If the font is on the
	printer hard disk, install the font in Windows using a font
	management utility or through the Windows control
	panel. For more information on installing a font using
	the Windows control panel, see the appropriate online
	help.
	The font might have been downloaded to the printer
	RAM rather than to the printer hard disk. When the
	printer is turned off and on, all data in the printer's RAM
	is lost. Download the font to RAM again. For more
	information on downloading fonts, see the online help.
	If you selected one font and another font prints out, the
	font is not available and the application has substituted
	the font. Make sure the selected font has been
	downloaded to the printer hard disk or printer RAM. For
	more information on downloading fonts, see the online
	help.

EN Application Problems 181