HP 8000 s manual Selecting the Display Language, To select the display language

Selecting the Display Language

Using the printer control panel, you can set the printer to display printer messages and print test pages in a variety of supported languages.

To select the display language

1Hold down SELECT while turning the printer off and then on. CONFIG LANGUAGE (in English) appears on the printer control panel display for approximately one second. Once the printer has restarted, LANGUAGE=ENGLISH will appear.

Note	Only -VALUE+, SELECT, and GO are active while the display language
	is being configured. All other keys are ignored.
	If you press GO without selecting a language, the printer will bring
	itself online and all subsequent messages will be displayed in
	English. However, since no display language was selected, the
	LANGUAGE=ENGLISH message will reappear (after the power-on self
	test) when the printer is next turned on. This message will be
	displayed every time the printer is turned on until you select a
	language through the configure language mode.
	2 Press -VALUE+until the language you want appears on the
	display.
	3 Press SELECT to save the selection. An asterisk (*) appears to the
	right of the selection. The language selected will be the default
	language until another selection is made by restarting the printer
	in the configure language mode.
	4 Press GO to bring the printer online.

50 2 Using the Printer Control Panel EN