HP 8000 s manual Recycling Consumables, Resetting the HP TonerGauge

Recycling Consumables

HP encourages responsible disposal of HP Color LaserJet printer consumables through its printing supplies recycling program. For details on this program, see “Environmental Product Stewardship Program” in appendix B. All consumables listed above can be disposed of through the printing supplies recycling program.

	Resetting the HP TonerGauge
	After a new toner cartridge is installed, the user must reset the
	HP TonerGauge from the control panel. When the top cover is closed
	after the printer has detected a toner low condition, the NEW TONER
	CARTRIDGE=NO message is displayed on the control panel for
	approximately 30 seconds. To reset the HP TonerGauge:
Note	If the NEW TONER CARTRIDGE=NO message is no longer displayed on
	the control panel and you have replaced one or more of the toner
	cartridges, then press MENU repeatedly until CONFIGURATION MENU
	appears. When you replace an empty or low toner cartridge, press
	ITEM repeatedly until NEW TONER CARTRIDGE=NO appears.
	1	Press - VALUE + until YES appears.
	2	Press SELECT to save the selection.
	3	NEW TONER=BLACK will appear. Press - VALUE + until the correct
		color appears.
	4	Press SELECT to save the selection.
	5	Repeat steps 2 through 4 if other cartridges have been replaced.
	6	Press GO to exit the menu.

EN Replacing Printer Consumables 127