HP 8000 s manual Printer Control Panel and Configuration Problems

Printer Control Panel and Configuration Problems

Problem	Cause and Solution
Printer control panel	The printer control panel display appears blank or is not
settings work incorrectly	lit even when the fan is running. The printer is in
	standby mode (off). Turn the printer on (button in).
	The printer settings in the application are different from
	the printer control panel settings. The settings in your
	application override the settings in the printer control
	panel.
	The settings were not correctly saved after changing
	them. Re-select the setting, then press SELECT. An
	asterisk (*) should appear to the right of the setting.
	The data indicator was lit and the settings were not
	activated after changing them. Re-select the printer
	control panel settings. Then, if the data indicator is lit,
	press SELECT to activate the settings and clear the print
	buffer.
	The Data indicator is lit. Buffered data exist in the
	printer. Pressing SELECT activates the printer control
	panel settings, but erases the buffered data. Pressing
	GO prints the buffered data in the current printer control
	panel settings, then activates the new printer control
	panel settings.
	If you are on a network, another user might have
	changed the printer control panel settings. See the
	system administrator to coordinate changes to printer
	control panel settings.
Cannot select the	The Ready indicator is lit. Press GO to take the printer
information menu	offline.
	The Data indicator is lit. Press GO to reset the printer.

EN Printer Control Panel and Configuration Problems 179