HP 8000 s manual Current media is damaged or in poor condition

Problem	Cause and Solution
Curled or wrinkled output	The media does not meet the specifications for this
	printer. For media specifications, see “Supported Media
	Weights and Sizes for Input Trays” in chapter 3.
	The current media is damaged or in poor condition.
	Remove the damaged media from the input tray, and
	then replace with undamaged media.
	You are operating the printer in excessively humid
	conditions. Make sure the printer is operating within the
	environmental specifications listed in appendix B.
	If you are printing heavy, solid fill areas, the excessive
	toner can cause excessive curl. Try printing different
	halftone patterns (a lighter shade of the same color), a
	lighter color, or a lighter pattern.
	The paper path might be curling the page. Change the
	paper path by printing from a different input tray to a
	different output bin.
	You are using media that was not stored correctly and
	could have absorbed water. Remove and replace with
	media from a fresh, unopened package.
	The media has a poorly cut edge. Remove any
	remaining media, rotate the media 180 degrees or flip it
	over, and then set it back in the input tray.

172 8 Solving Printer Problems EN