HP 8000 s manual Printing from Tray 4 some printer models only, To load media into tray

Printing from Tray 4 (some printer models only)

Load up to 2,000 sheets of 20 lb (75 g/m2) bond paper in tray 4.

To load media into tray 4

1 Firmly grip the handle in the center of the input tray, squeeze the release lever, and pull the input tray out until it stops.

Note

To use the media size currently configured in the input tray, go to step 5. To use a different size, go to step 2.

2 Adjust the front media guide by pulling up on the pin (A), placing the media guide into the slots on the top and bottom of the input tray that correspond to the media size you are loading (B), and pushing in the pin.

3 Repeat step 2 to adjust the back media guide.

4 Repeat step 2 to adjust the left media guide.

Note

For 11-by-17 inch media, move the left media guide to the back of the input tray.

84 3 Common Printing Tasks EN