HP 8000 s manual Preprinted Forms and Letterhead

Preprinted Forms and Letterhead

Observe the following guidelines to avoid problems with preprinted forms and letterhead.

zForms and letterhead must have been printed with heat-resistant inks that will not melt, vaporize, or release hazardous emissions when subjected to the printer's fusing temperatures (approximately 374° F, or 190° C).

zThe inks must be non-flammable and must not adversely affect any printer rollers.

zForms and letterhead should be sealed in a moisture-proof wrapping to prevent moisture damage during storage.

zInks must be completely dry on forms and letterhead before they are used in the printer. Ink that is not completely dry can come off the page during the fusing process.

68 3 Common Printing Tasks EN