HP 8000 s manual Using the Printer, Control Panel

Message	Description	Recommended Action
RESTORING	The printer is resetting the	Reset the EIO type and
FACTORY SETTINGS	printer's factory defaults. The	configure the printer before
	printer is in the process of	bringing the printer online. For
	completing a cold reset.	more information on factory
	When the reset is completed,	defaults and configuring the
	the printer returns to the	printer control panel, see
	ready state but remains	chapter 2, “Using the Printer
	offline.	Control Panel.”
SEPARATOR	The multi-bin mailbox output	Remove all media from the
OUTPUT BIN FULL	bins are full.	output bins on the multi-bin
		mailbox to continue printing.
STACKER	The multi-bin mailbox output	Remove all media from the
OUTPUT BIN FULL	bins are full.	output bins on the multi-bin
		mailbox to continue printing.
STAPLER LOW ON	The Stapler Cartridge has 20	No action required.
STAPLES	to 50 staples remaining.
STKR: ATTACH TO	The device is not attached to	Make sure that there is a
PRINTER	the printer properly.	proper attachment between
		the device and the printer, and
		wait for a solid green status
		light on the user LED on the
		device.
STKR: CLOSE	The Stapler door is open or it	Close the Stapler door
STAPLER DOOR	is not closed properly.	properly.
STKR: DETACH AND	A paper jam occurred in the	Clear the paper jam.
CLEAR JAM	device.
STKR: TRAY	The weight capacity of the	Clear the paper from the
OVERLOAD	stacker bin has been reached.	Stacker Bin.
alternates with
CLEAR PAPER FROM
OPTIONAL BIN 1

154 7 Printer Control Panel Messages EN