HP 8000 s manual Setting the I/O Timeout, To set the I/O timeout

Setting the I/O Timeout

The I/O timeout sets the amount of time the printer waits after receiving print data before switching I/O ports. The default time is 30 seconds.

To set the I/O timeout

1Press MENU until I/O MENU appears on the printer control panel display.

2Press ITEM until I/O TIMEOUT appears on the display.

3Press -VALUE+until the interval you want (between 5 and 300 seconds) appears on the display.

4Press SELECT to save the selection. An asterisk (*) appears to the right of the selection.

5Press GO to bring the printer online.

Note	If the I/O timeout is too short, print jobs might be incomplete. If the I/O
	timeout is too long, print jobs might be unnecessarily delayed.

48 2 Using the Printer Control Panel EN